Hebei Tongrui
Wire Mesh Fencing Factory
Head Office
  Home About Factory Products Video Contact Us
Products Center
Welded Wire Mesh Fence
  Temporary Fencing
Euro Welded Fence
Curvy Welded Fence
General Welded Fence
Security Fence
Double Loop Decorative Fence
Double Wires Fence
Ornamental Fence
Chain Link Fence
  Galvanized Chain Link Fence
PVC Chain Link Fence
Plastic Coated Chain Link Fence
Temporary Chain Link Fence
Chain Link Fence Applications
  Chain Link Fence for Industrial
Chain Link Fence for Residential
Chain link fence for Road Fence
Chain Link Fence for Dog
Chain Link  Fence for Tennis Court
Chain Link Fence for Zoo
Chain Link Fence for Cantilever Gates
Chain Link Fence for Security
Chain Link Fence Installation pdf
Chain Link Fence Faq
Other Wire Mesh Fence
  Field Fence
Expanded Metal Fence
Barbed Wire Fence

Tools & Materials

  • String or chalk line and stakes
  • Tape measure
  • Post hole digger
  • Wheelbarrow
  • Shovel
  • Hoe
  • Carpenter's level
  • 1/2" and 9/16" wrench or crescent wrench
  • Hacksaw or pipe cutter
  • Fence stretcher
  • Pliers
  • Tension wire clip (hog ring)

Parts List.

Prepare Fence Layout
Figure 1.

Locate your property's boundary lines. It is recommended that all posts be set approximately 4" inside the property line so that concrete footings do not encroach onto any adjoining property.
Measure the overall length of your planned fence to determine how many feet of chain-link fabric and top rail will be required (Fig. 1).

Mark the location of each terminal post (corner, end, and gate posts are called terminal posts) with a stake. When determining the positions of gate posts, remember that clearance for hinges, latches, etc., is included in the listed opening width of the gate. Therefore, if you ordered a gate for a 36" opening, the post spacing should be exactly 36", inside post face to inside post face.
German Spanish French Italian Portuguese Japanese Korean Arabic Russian